Receiver module : RX480-E4
- Working Voltage : DC3.3~5V
- Quiescent Current : ≤5mA
- Working Frequency: 315MHz / 433MHz( Others can be customized )
- Receive Sensitivity: -108dB
- Receive Distance: 15 meters above
- Frequency band: ±0.2MHz
- Working Temperature : -25~75
- Working mode:Point move, self-locking, interlocking
- The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons.
Compatible transmitter encoding type: EV1527
If you are not using the transmitter encoding EV1527 will not be applied to the receiver.
Transmitter module : TX118SA-4
- Transmitting power: 11dBm
- Distance: 200M
- Emission current: 10MA
- Standby current: less than 3UA
- Rate of fire: maximum 10KB / S
- Transmit deviation: +/- 7. 5KHz / narrow-band emission
- Modulation: ASK
- Operating Voltage: DC 3V-24V
- Encoding : EV1527 1527 Learning code
- Customizable special code: MCU type.Optional fixed encoding type: PT2262 / EV1527 / HT6P20B (Minimum order:500pcs)
- Key data: A, B, C, D groups of 4 inputs can be combined into 15 groups.Standby current: <3UA
- Each module has a unique ID address code.
- All modules K1-K4 four key code is the same.
- : Negative power supply
+: Positive power supply, DC 3-24V
K1: External input keys, short to ground start transmitting data to 1, the A button on the remote control.
K2: External input keys, short to ground 2 start transmitting data, the equivalent of the remote control B button.
K3: External input keys, short to ground start transmitting data 3, the equivalent of the C key on the remote control.
K4: External input keys, short to ground 4 start transmitting data, the equivalent of the remote control D keys.
ANT: transmitting antenna
- 1 * Receiver module 433Mhz (RX480-E4)